Description
1. Installation precautions
Technical requirements
(1) Before installation, the cleanliness level of the mailbox and connecting pipes must meet ISO 4406 18/15.
(2) Before installation, make sure that there are no burrs on the joint surfaces and that the installation surfaces are free of debris and dust.
(3) During the installation process, a lifting device should be used.
(4) When lifting, avoid touching the oil port sealing surface.
(5) Be especially careful not to allow debris to enter the oil port.
(6) Do not damage the drive shaft. Please loosen the lifting device after tightening the mounting screws.
(7) When connected to the main engine, the coaxiality between the main shaft and the engine main shaft (or connecting sleeve) shall not exceed 0.05.
2. Precautions for use
(1) Before operation, inject hydraulic oil into the pump body from the housing oil drain ports 1 and 12.
(2) Before operation, the air in the casing must be exhausted.
(3) When in use, there should be no hydraulic oil or other liquid residue on the joint surfaces of the pump.
(4) When the pump is running, avoid collision with the drive shaft.
Reviews
There are no reviews yet.